Basic components | Motor Injection

In general, the basic component of gasoline injection system are grouped into three fuel system (fuel system), air induction system (water induction system) and electronic control systems (electronic control system). However, Yamaha have a term in solitary group component injection Yamaha V-Ixion the sensor group, the control group and actuator group.

Sensor group consists of components that duty to detect the condition of the machine and change into electrical signals. The sensor signals generated group sent to the ECU. Control group is a computer that processes the sensor inputs from the group and ordered actuator working group. So actuator is a component group eksekutor command of the ECU, such as gasoline pumps and injektor.

If seen from the spray method is again divided into two. That is the basic injection control group (basic fuel injection devices) and group settings correction (correction devices). Corrections system is needed because the machine will not work perfectly with only the basic injection volume. The machine must be able to work on various conditions.

The basic components include the injection MAP sensors and sensor rotary engine. While the correction devices, among others, incoming air temperature sensor, throttle position and temperature of the gas engine.

Examples of such work. Incoming air temperature information is sent to the ECU as additional information from the MAP sensor. ECU will add or reduce the spray of gas was based on additional information. In other words, although the amount of air entering the same but the number of sprays gasoline can vary.

The following details the basic components of gasoline injection system in general (more on the car and applied moge). Have been included in the basic components of the fuel injection devices and correction devices. Remember, in practice not all components are available in an injection gasoline engine. Even the implementation of a special motorcycle learner-cc small designed very practical needs.

1. Fuel system
Category that includes components that distribute gasoline (fuel system), among others: gas tank, pump gasoline, distillate fuels, conduit gasoline, fuel pressure regulators, pulsation damper, injektor and cold start injektor.

2. Air induction system
Components of a number canalize the air (water induction system) is needed in the burning include: air filter, the water flow meter, throttle body and water Valve.

3. Electronic control systems
The injection system that includes electronic control (electronic control system), namely: water flow meters, manifold absolute pressure, water temperature sensor, throttle position sensor, Intake water temperature sensors, electronic control units, ignition signal, Oxygen sensor, cold start injector time switch Ignition and enjoy and signal.

Read More......

Tips for Women's | Cycling Motor

Ten years ago, in Jakarta, is difficult to find women who ride motorcycles. But now, this group more easily found in the streets the capital. The problem, the traffic capital is not a friendly place for anyone. Moreover, women usually have a big handicap in the affairs of a motorcycle.

Now, in this condition, moment of need-special moment for women that can remain calm, safe and (possible) comfortable driving on a street in Jakarta. The following tips motor cycling for women.

1. Save important phone numbers such as a mechanical workshop or your trust in the mobile phone. Because the phone number is required when a motorcycle you experience a sudden damage in the middle of the road.


2. Do not wear skirt when driving. Because it will be very difficult for you to the bottleneck situation. Better wear long trousers to protect the feet.

3. Try not wear high-heeled shoes when driving. Because it will be difficult when you are stuck in the situation. Use the flat shoes and have the right thickness.

4. Do not use excessive jewelry, such as bracelets and diamond necklace. This will trigger a motor criminals to rob you.

5. If the drive in the quiet street, try to not go alone. Dekatilah, other motor drivers, so you seems to see in a group.

6. Do not panic when faced with situations such as a bad accident, or a collision. Better aside and report to the police if it happens.

Read More......

In Effect Hot Air | Motor Tires

Facing the pressure and speed changes as the season now need special tricks in the use of tires. Its tire pressure when hot and cold will change. Pas cold tires using high risk of slippage.

Conversely, hot weather with flat tires also dangerous. Check out the explanation here feilong, from the Dept.. Technical Service PT Sumi Rubber Indonesia, the tire manufacturer Dunlop. He said the public nature of the tires formation is hot (heat generation).

when the weather is hot, avoid the use of high speed, because the tire temperature will increase the speed increases. It tires for motorcycles manufactured bulk, such as hot now still in the tolerance limit.

But according to tire experts, the exact opposite. "Tire due to heat expansion thus need the additional pressure of the wind again. So, if the hot conditions, it should blow, "said the man who ngantor in Benin City, Tangerang, Banten this. Yulfahmi message blow around 0.2 kg, adjusted burden. This Likewise Iwan feilong disclosed. He said on condition of heat, pressure must be maintained ideal 28 psi plus about 3 psi.

Read More......

Tips For Bikers

Motorcycle is a machine, the thousands of components. In general, motorcyclists can certainly expect that in the long term. For the owner of a motorcycle engine believes the treatment, because the condition of a motorcycle engine also depends on the maintenance and driving habits of the owner. The following tips and tricks about the care for a motorcycle engine:
In general, there is damage to the first signs, unless things that diverge accidents, for example. Manages to see if the symptoms are not normal / not usually on a motorbike. This attitude will help you and enable them to detect more early damage.
When the engine damaged, the improvement can no longer be delayed, in other words, must be repaired immediately. However, remember, if you do not have sufficient know-how, not dismantle and repair them alone. Because in addition to waste time and energy, the damage can be severe. You better take it immediately in the workshop.

When the motorcycle you experience symptoms of damage in a row and more than one of the possibilities is the most appropriate examine the easy parts first and then to new parts of others. You may attend the workshop with a full description, it will be easier for the mechanics of memperbaikinya.Apabila to damage occurred in a small way, such as damage to the Mur, screws, cables, leakage of gas / oil, which does not require Disassembly of the engine so complicated, you can improvements alone. However, if the injury occurred that resulted patahnya of components and requires disassembling the machine you need to bring to the workshop service.

Read More......

Guide For Bikers | Before Get Started-Online Shopping

The world of motorcycling is a fun and exciting adventure, but before you get started, you should know a little something about the sport. You are probably ready to get suited up and ride, but learn a little about what you are getting into.

First Steps

The first thing you should do before looking at a motorcycle, is to visit the local Department of Motor Vehicles and pick up the free learner's book they offer for novice riders. You will need a motorcycle driver's license in order to ride, so be sure you get information and practice you will need in order to pass the motorcycle driver's test.

The next thing you can do to ensure you are taking all the proper safety precautions is to sign up for a motorcycle safety class in your area. Taking the extra time to learn all you can about the practical side of riding a motorcycle may one day save your life.

You should also be sure you are outfitted with the proper clothing. You will need a sturdy pair of boots, a leather jacket, a good pair of motorcycle gloves and of course, a helmet. These items of clothing may prevent you from more serious injuries, should you have any kind of accident when you are riding your motorcycle.

Getting Ready to Shop

Now that you know some of the basic procedures you will need to ride with confidence and safety, it is time to go shopping for that motorcycle you have been longing for. It is easy to get caught up in the latest styles, but you need to purchase a motorcycle that will be the right one for you; not your friend, not anyone else, but the right ride for you.

You can visit many local showrooms in your area and test drive as many motorcycles you need to until you find the bike that feels like it was made for you. Then, armed with all the knowledge you have gathered, you are ready to sit down in front of you computer and get started looking for the motorcycle of your dreams.

Buying and maintaining a motorcycle is not a cheap endeavor, it can run into quite a bit of money especially for those who are just getting started and need to start from scratch. Never sacrifice quality for price when you are shopping for a motorcycle. Just because the deal seems impossible to pass up, be sure that you are buying a motorcycle that will last you for years to come.

Websites You Can Visit

When you are shopping for motorcycles online, there is a host of websites you can visit. There are websites in Canada, the United Kingdom as well as the United States. You can shop for used or new motorcycles and be able to compare prices quickly and easily. When you shop for your motorcycle online, you can find not only a motorcycle, but lots of tips and advice for the best websites like The Red Book, Cycle Trader and eBay, where you can find the best price for the motorcycle you want to buy.

Read More......